Printronix P5000LJ User Manual page 219

Adding Preferred File Server
HTML Method
1. Load a Web browser on a network station that can communicate with the
print server over TCP/IP.
2. Direct your Web browser to URL:
http://P5000LJIPaddress/networkConf.html
(e.g., http://192.75.11.9/networkConf.html
Note
If prompted for a User ID and password first, type in
press ENTER at the password prompt since there is no password by
default.
3. Look under the "Novell" section and add the name of the preferred file
server in the "File Server" field.
4. Click on the SUBMIT button when done and physically re-power the print
server to make the new settings take effect.
Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet ipaddress
Note
If prompted for a User ID and password first, type in
press ENTER at the password prompt since there is no password by
default.
2. You should now see a prompt displayed that has the NIC's IP address
followed by a colon then
ipaddress:root>
3. At the prompt, enter:
store pserver novell fserver add fservername
where fservername
as a preferred file server. This adds the specified file server as a preferred
file server on the NIC.
4. Reset the unit to ensure the changes take effect.
reset
Preferred File Server (NDS & Bindery)
.
root
is the name of the Novell file server you want to add
)
for the ID and
root
root for the ID and
219