Using Bootp - Printronix P5000LJ User Manual

Web Browser
Initiate the Web browser and enter the IP Address or hosts table name in the
URL line.
Click on "Configuration."
Log in as
root
Enter the values you need for subnet mask and gateway and click "Submit."
Delete the static arp entry: at a DOS prompt, type the command
192.168.20.20
click on "System Administration" and "Reset Adapter" to store the values
.
Note Windows 95/98 pre-winsoc2 TCP/IP has a bug in which an arp entry will
not be created unless a valid arp entry exists in the arp table on the client
you are using. To ensure you have a valid arp entry, ping your own
workstation in the DOS window and type the command
arp table before using the

Using BOOTP

BOOTP allows you to assign an IP address to the NIC upon bootup. In
addition, the BOOTP server can provide additional details such as a default
router/gateway address. To configure the NIC with its TCP/IP settings using
BOOTP, complete the following steps.
1. On your BOOTP server, make an entry in the /etc/bootptab file for the
NIC.
Syntax:
NICIPname:\
:sm=netmask:\
:hd=homedirectory:\
:bf=null:\
:gw=defaultgateway:\
:ht=ethernet:\
:ha=ethernetaddress:\
:ip=ipaddress:\
:ts=timeserver:\
:to=timezone:
Example:
spike:\
:sm=255.255.255.0:\
:hd=/usr/null:\
:bf=null:\
:gw=192.75.11.1:\
:ht=ethernet:\
:ha=008072070060:\
:ip=192.75.11.9:\
:ts=192.75.11.7:\
:to=25200:
, no password.
(with your own IP Address value in place of this one). Then
arp -s command.
Using BOOTP
arp -d
arp -a to view the
163