Printronix P5000LJ User Manual page 70

Chapter 3
Configuring NIC
Remote Shell
A TCP/IP command that helps configure print server settings remotely. A
TCP/IP host uses this command to remotely execute a single command on
the NIC.
Example:
rsh spike list prn
This command remotely executes the npsh command
named
Configuration Using a Web Browser
NIC settings can be configured over TCP/IP through a standard Web browser.
The NIC Web pages provide a handy way to access some of the commands
built into the print server. You can access online help for all HTML pages.
Note If a router is used, make sure a gateway value is configured.
To access the NIC home page:
1. Make sure the print server has an IP address and subnet mask so it is
recognizable on your TCP/IP network.
2. Make sure your network station can successfully
network.
3. Direct your Web browser to the Uniform Resource Locator (URL)
http://IPaddress
able to determine the exact state of the printer from the printer status
screen, as the shown in Figure 11.
70
spike .
(e.g.,
list prn
ping the NIC over the
http://192.75.11.9
on the NIC
). You will be