Adjusting Polling Time (Nds & Bindery) - Printronix P5000LJ User Manual

Chapter 12
Novell NIC Configuration (10/100Base-T)
Note The passwords entered in Netware Administrator or PCONSOLE must
match the password set on the unit.
4. Click the SUBMIT button when done and physically re-power the printer
to make the new settings take effect.
Print Server Setup - Manual (Telnet) Method
1. Telnet to the print server. This will bring up a login screen:
telnet ipaddress
Note
If prompted for a User ID and password first, type in
press ENTER at the password prompt since there is no password by
default.
2. You should now see a prompt displayed that has the NIC's IP address
followed by a colon then
ipaddress:root>
3. At the prompt, enter:
store pserver novell passwd password
Note The passwords entered in Netware Administrator or PCONSOLE must
match the password set on the unit.
4. Reset the unit to ensure the changes take effect.
reset
Adjusting Polling Time (NDS & Bindery)
You can set the poll time the NIC will use when checking for new jobs under a
PSERVER setup. To do this, complete the following steps.
Netware 4.x and 5.x
1. Log in to NetWare Administrator as a user with security equal to "Admin"
on your Novell host.
2. Double click on the printer object for which you wish to change the poll
time. This will bring up the printer objects details pages.
3. Click on "Configuration" to display the configuration page.
4. Change the "Service Interval" to the desired number (in seconds).
222
root
root.
for the ID and