S T A R R F 7 0
4. Installation
-1
4
. Pole Mount using Mounting Bracket (Optional purchase)
Install the RF70 to the mounting plate and instal l the mounting bracket to the pole as
shown in the photos below, and then adjust the angle of the reader toward the tags.
(1) Install mounting plate to RF70
by using 8 screws
(3) Assemble bracket to mounting
plate by using 2 hex bolts/nuts
20021214
(2) Assemble "U" bolt to bracket
(4) Install mounting bracket to the pole
then adjust the angle of the reader
4
P R O X I M I T Y R E A D E R
USER'S MANUAL