Identifying Supplied Parts; Installation - IDTECK Star RF30 User Manual

5. Identifying Supplied Parts

Please unpack and check the contents of the box.
Reader Module
(1ea)

6. Installation

6-1. Wall Mount
Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and drill one 1/2" hole for the reader
cable 1.7"(4.31cm) apart from the top hole.
(If you have installed an electric gang box then skip this step and go to step 4.2.)
6-2. Put reader cable into the center hole and install the reader module by using two 6-32 or M3
screws (Not included).
6-3. Put bezel on to the reader module then push bezel until you hear the locking sound.
RF30 / IP30 Bezel
(1ea)
5
User's Manual
(1copy)