Product Installation - IDTECK PROX10 User Manual

User Manual

5. PRODUCT INSTALLATION

5-1
. Inserting into doorframe / Attaching to wall
The distance between two 6-32/M3 holes which are located vertically is
3.3"(8.38cm). One 1/2" hole between them is for cable from the reader and has
1.7"(4.31cm) of distance from upper hole. (If it has been attached already, you
can skip this part)
5-2.
Insert the reader cable to the hole in the middle and fix reader module
with two 6-32/M3 screws.
5-3
. put the reader module in Bezel and push it until it clicked shut.
7