Installation - IDTECK STAR RFK101 Instruction

STAR RFK101
Color
Operating Environment
Overall Size(WxHxD)
Weight
Output Format

4. Installation

4-1. Drill two 6-32 or M3 holes 3.3"(8.38cm) apart in vertical and one 1/2" hole at the center of
these two holes. (If you have installed electric gang box then skip this step.)
4-2. Using two 6-32 or M3 screws, install wall mount to the wall.
4-3. Insert 5 O-rings to the wall mount as indicated, then route the cable of the main unit through
the center hole and push the main unit to wall mount to lock the main unit and make sure
that the main unit is locked with wall mount.
RFK101-20011219
Dark Pearl Gray
-35℃ ~ +65℃, 10~90% Humidity
3.40"x3.94"x1.22"(487x100x31mm)
0.412 lbs(190 g)
26bit Wiegand, RS-232, ABA Track II Magstripe Output
Format with 8bit Burst or 3x4 Matrix Format for PIN
- 4 -
ID-TECK
PROXIMITY READER