Installing The Vertical Cable Guides - Cisco ONS 15540 ESPx Hardware Installation Manual

Installing the Vertical Cable Guides

Installing the Vertical Cable Guides
Step 1
Step 2
Step 3
Step 4
Cisco ONS 15540 ESPx Hardware Installation Guide
2-16
Vertical cable guides are installed onto the rack next to the cross connect drawers.
They are used to guide and hold the cables down from the line card motherboards
into the cross connect drawers.
To install the vertical cable guides onto the chassis, follow these steps:
Make sure you have the correct vertical cable guide for the side of the rack you
are installing on.
Hold the vertical cable guide over the rack next to the correct storage or cross
connect drawer. See Figure 2-9
Figure 2-9 Vertical Cable Guide Placement
Align the mounting holes on the vertical cable guide with the mounting holes in
the equipment rack.
Secure the vertical cable guides with number 12-24 or 10-32 screws. (See
Figure 2-10.)
Chapter 2 Installing the Cisco ONS 15540 ESPx
for placement guidelines.
78-16436-01