Chapter 2
Installing the Cisco ONS 15540 ESPx
Figure 2-24 Tightening the Attachment Plates
Step 6
Ensure that all site power and grounding requirements described in the Regulatory
Compliance and Safety Information for the Cisco ONS 15500 Series have been
met before you connect the external power supply to a power source.
Plug one end of the two-pin Molex cord into the external power supply. (See
Step 7
Figure
78-16436-01
2-25.)
Cisco ONS 15540 ESPx Hardware Installation Guide
Attachment plate
shown in up position
Powering Up the Shelf
+
-
INPUT OK OUTPUT OK
2-45