Transponder Modules - Cisco ONS 15540 ESPx Hardware Installation Manual

Extended services platform
Hide thumbs Also See for ONS 15540 ESPx:
Table of Contents

Advertisement

Chapter 1
Product Overview

Transponder Modules

78-16436-01
Table 1-11
lists the LEDs for the 10-Gbps line card motherboard.
Table 1-11 10-Gbps Line Card Motherboard LEDs
LED
STATUS
In the transponder module, the client signal is converted to an ITU-compliant
wavelength, which is cross-connected over the optical backplane to the
mux/demux modules. You can populate the line card motherboard subcard slots
with as few or as many transponder modules as required (up to 32) to support the
desired number of client signals or data channels.
The Cisco ONS 15540 ESPx supports four types of interface transponder
modules:
SM (single-mode) transponder modules
MM (multimode) transponder modules
Type 2 extended range transponder modules with SFP optics
10-GE transponder modules
Status
Blinking green
Solid green
Orange
Off
Cisco ONS 15540 ESPx Hardware Installation Guide
Cisco ONS 15540 ESPx Components
Description
Motherboard has a good
system clock from the
primary processor and is
out of the reset state.
Software initialization is
successful.
System clock is not
present. Board is
unavailable.
Board failure.
1-21

Advertisement

Table of Contents
loading

Table of Contents