Table of Contents
Advertisement
Chapter 3
Connecting the Cisco ONS 15540 ESPx
Figure 3-30 Mounting the Transition Box
1
Connect the cables to the bottom half of the desired adapter mux/demux
Step 14
connections on the inner side of the cross connect panel. These are color coded
and should be connected by matching the color on the panel to the colored wires
out of the transition box. (See
78-16436-01
2.5-Gbps line card
motherboard connections
Connecting the 2.5-Gbps Transponder Module
1
2
2
Mux/demux motherboard
connections
Figure
3-31.)
Cisco ONS 15540 ESPx Hardware Installation Guide
3-43
Advertisement
Table of Contents
