Powering Up the Shelf
Figure 2-23 Handling the 15540-PWR-AC Power Supply
Caution
Use both hands to install and remove the 15540-PWR-AC power supply.
Step 4
Slide the 15540-PWR-AC power supply all the way into the 15540-PWR-AC
external power shelf bay, aligning the attachment plates with the slots on the top
of the external power shelf.
Slide each attachment plate up so that the upper edge is wedged into the
Step 5
15540-PWR-AC external power shelf slot and use a screwdriver to tighten the two
screws on each attachment plate. (See
Cisco ONS 15540 ESPx Hardware Installation Guide
2-44
Chapter 2
Installing the Cisco ONS 15540 ESPx
+
-
INPUT OK OUTPUT OK
Figure
2-24.)
78-16436-01