Cisco ONS 15540 ESPx Hardware Installation Manual page 114

Powering Up the Shelf
To install the 15540-ACPS-N-E power supply, follow these steps:
Use a flat blade screwdriver to push in on the release handle latch until the release
Step 1
handle opens. (See
Figure 2-37 Opening the Release Handle
With the release handle partially open, place both hands underneath the bottom of
Step 2
the external power supply and carry it to the external power shelf. (See
Figure
Cisco ONS 15540 ESPx Hardware Installation Guide
2-58
Figure 2-37.)
AC OK
DC OK
Fa ul t
2-38.)
Chapter 2 Installing the Cisco ONS 15540 ESPx
78-16436-01