Removing Sfp Optics With Mt-Rj Connectors - Cisco ONS 15540 ESPx Hardware Installation Manual

Chapter 2 Installing the Cisco ONS 15540 ESPx

Removing SFP Optics with MT-RJ Connectors

Note
Step 1
Step 2
78-16436-01
You need the cable installation and removal tool to remove the SFP with the
MT-RJ connector.
To remove an SFP with an MT-RJ connector from the Type 2 extended range
transponder module, follow these steps:
Remove the cable from the desired SFP.
Remove the SFP from the module by pushing against the lever on the SFP to
release it from the module. (See Figure 2-12.)
Cisco ONS 15540 ESPx Hardware Installation Guide
Installing and Removing Modules
2-27