Installing the Chassis
Installing the Chassis
Warning
Step 1
Step 2
Step 3
Cisco ONS 15540 ESPx Hardware Installation Guide
2-6
Only trained and qualified personnel should be allowed to install, replace, or
service this equipment.
To install the chassis in the rack, follow these steps:
Grasp the bottom edge of the chassis with one hand near the front and the other
on the handles. With one person at each side of the chassis, use the handles on the
chassis to slowly lift the chassis in unison.
Position the chassis in the rack.
Align the mounting holes in the L bracket with the mounting holes in the
equipment rack. (See
Figure
Chapter 2
Installing the Cisco ONS 15540 ESPx
2-2.)
78-16436-01