Cabling 2.5-Gbps Transponder Modules With Cross Connect Drawers - Cisco ONS 15540 ESPx Hardware Installation Manual

Connecting the 2.5-Gbps Transponder Module
Cabling 2.5-Gbps Transponder Modules with Cross Connect
Drawers
Step 1
Step 2
Cisco ONS 15540 ESPx Hardware Installation Guide
3-38
To connect cables on the Cisco ONS 15540 ESPx 2.5-Gbps transponder modules
using the cross connect drawer, follow these steps:
Open the cable storage drawer by pushing the tabs in to release the lock on the
drawer. (See Figure 3-25.)
Figure 3-25 Opening the Cable Storage Drawer
Pull out the cable storage drawer. (See
Chapter 3 Connecting the Cisco ONS 15540 ESPx
Figure 3-26.)
78-16436-01