Using Y-Cable
Attaching the Y-Cable
Step 1
Step 2
Step 3
Step 4
Cisco ONS 15540 ESPx Hardware Installation Guide
2-62
To attach the y-cable to the transponder modules, follow these steps:
Read the configuration guidelines in the
Guide
and the
Cisco ONS 15540 ESPx Command
Choose the ports you will use.
Lift the shutters on the two intended ports and attach one end of the two-sided
cable to each of the ports.
Attach the other end to the client equipment if not already attached.
Chapter 2
Installing the Cisco ONS 15540 ESPx
Cisco ONS 15540 ESPx Configuration
Reference.
78-16436-01