Setting Mli Interpreter Options - Avery Dennison Monarch 9419 Administrator's Manual

S e t t i n g M L I I n t e r p r e t e r O p t i o n s
Avery Dennison's MONARCH LANGUAGE INTERPRETER™ (MLI™) and the Avery
Dennison 9419 printer are set up for use with ZIH Corp.'s ZPL II®. If you have any
questions about using the 9419 printer with these data streams, please contact your
Avery Dennison representative.
The MLI interpreter options are listed in the table below.
Option
Darkness
Print Speed
Tear Off
Print Mode
Print W idth
List Fonts
List Images
List Formats
List Setup
Control Prefix
Format Prefix
Delimiter Char
Media Power Up
6-4 Offline Mode System Administrator's Guide
Choices/Description
0 to 30
Adjusts darkness of print
2 to 6
Sets the print speed
+/- 0 to 9
Sets the media stopping
point for easy tear off
Tear Off/Peeler Off/Cutter
0 to 9
Sets the print width
Prints list of printer fonts
Prints list of printer
images
Prints list of printer
formats
Prints current printer
configuration
Sets control prefix
character
Sets format prefix
character
Sets the delimiter
character
Feed/Calibration/Length/
No Motion
Sets media action
Default
16
4 ips
0 dot
Tear Off
812 dot
NA
NA
NA
NA
7E ~
5E ^
2C ,
No Motion