Setting The Speed - Avery Dennison Monarch 9855 Operator's Handbook Manual

S e t t i n g t h e S p e e d
You can change the print speed for bar codes or graphics. If you select
"default" for speed, formats with serial bar codes automatically print at 2.5
ips and formats with parallel bar codes print at 6.0 ips. 12.0 ips printing is
an option that must be purchased separately.
Note: If you change the speed, you must resend your formats or turn the
printer off and back on before the change takes effect.
To change the setting, from the Main Menu, select Setup, then Supply.
Then, follow these steps.
1. Press or
SUPPLY
Speed
2. Press Enter/Pause to set the speed option. The current setting is
displayed, for example:
SPEED
Default
3. Press or
want, press Enter/Pause. Press Escape/Clear until you see the Main
Menu.
Note: For additional high speed printing information, see Chapter 8,
"Printing."
until you see
to see the other options. After you display the option you
Setting Supply Options 4-5