Loading For Non-Peel Mode; Selecting The Supply Type - Avery Dennison Monarch Operator's Handbook Manual

Loading for Non-Peel Mode

To load supplies for non-peel mode:
1. Feed the supply under the applicator roller and over the label deflector.
Ap plicator Roller
Label Deflector
2. Close the supply cover.
3. Tap Load Supply from the printer icon menu, then Calibrate.
S e l e c t i n g t h e S u p p l y T y p e
To select the supply type:
1. Tap the printer icon from the Status Bar.
2. Tap Load Supply. An hourglass appears briefly, then you see
3-4 Operator's Handbook