Message Window; Reboot Switch; Logout - Compex CGX3224 User Manual

24+2 gigabit snpm switch with integrated router

Hide thumbs Also See for CGX3224:

Table of Contents

Chapter 9

Using SYSTEM TOOLS Menu

9.8

Message Window

This window will list out the action/s taken while doing configuring. It helps you to dig

out the history of various action/s.

To save all your actions, click on SaveAs button. The system will prompt you to save

your file in your preferred location.

9.9

Rebooting of Compex CGX3224 is required after changes are

made in the configuration or setting.

1. Click on Reboot Switch from the Command window.

2. Click Yes to reboot the switch. The system will prompt you

to logon again after 30 seconds to see the effect:

9.10

By clicking Logout button, you will get a logout GUI as shown below. Alternatively,

you can log in again into the web-based browser via http://192.168.100.128 or the new

IP address, which you have assigned to the switch.

NOTE

If you changed a new IP Address for Compex CGX3224, the system will NOT

automatically changed to the new IP address after you click on the Logon button.

Table of Contents

Show Quick Links

Table of Contents