Table of Contents
Advertisement
8.
After you modify all the entries, you have to press the "Update VLAN"
button on the left-hand-side dialog box. Following screen will appear at the
bottom dialog box:
Press the "Yes" button if you are sure about all the VLAN table entries are
correct. The VLAN table will now be updated to the hardware and take
effect.
Save Configuration and Restore Factory Default setting
1.
After you do all the changes, you must save the configuration so that next
time, you power down and up again or reboot the SGX3224, all the
configuration will be back working again.
2.
Press the "Save or Reset Setting" button on the left-hand-side dialog box.
Following screen will appear at the bottom:
Press the "Save" button to save the configuration. On this same screen, you
can also reset the configuration to factory default setting by pressing the
"Clear and Reset" button.
English
Compex 24 - Port All 10/100 Management Switch
(SGX3224, SGX3224 PLUS)
15
Advertisement
Table of Contents
