Menu Bar - Extron electronics XTP T USW 103 User Manual

Menu Bar

The menu bar contains three menus for configuring software settings.
File menu
The menu contains options for disconnecting from the switcher and exiting the
File
program. To access the menu, click the
Figure 18.
Disconnect
This option disconnects the connected device from the XTP System Configuration Software.
From the
File
NOTE: If the device is already disconnected, the
device is connected.
Exit
This option disconnects the switcher from the software and closes the application.
From the
File
Tools menu
The
Tools
menu.
Tools
Figure 19.
NOTE: The
available when directly connected to the device. See an XTP matrix switcher user
guide (www.extron.com) for more information on these features.
File Menu
menu, select
Disconnect
menu, select . The application closes.
Exit
menu contains an option for updating firmware. To access this menu, click the
Tools Menu
and
Backup and Restore
XTP T USW 103 Switcher • XTP System Configuration Software
menu.
File
. The screen opens.
Connections
option is disabled until a
Disconnect
Commissioning Report
options are not
26