Edid Minder - Extron electronics XTP T USW 103 User Manual

EDID Minder

Use the
EDID Minder
output EDID to the input. Click the
Navigation
The
EDID Minder
which are each represented by output display icons.
• Factory default EDID options are displayed in blue.
Connected output resolutions and devices are displayed in green.
•
• Custom loaded or saved EDID options are displayed in yellow.
Figure 30.
Assign EDID
To assign EDID to selected inputs:
1. Select an available EDID icon from the
panel (
EDID
2. Select the check box of the connected input (
3. Click the
TIP: Alternatively, EDID can be assigned by dragging and dropping the desired EDID
onto the input.
To assign EDID to all inputs:
1. Select an available EDID icon from the
panel (
EDID
2. Click the
screen to assign unique EDID to the input or match current
EDID Minder
bar. The screen opens.
EDID Minder
screen displays a table of EDID options and connected output devices,
EDID Minder Screen
- ).
2 4
button below the input area (
Assign
- ).
2 4
button (
7
Assign to All
XTP T USW 103 Switcher • XTP System Configuration Software
icon (see figure 30,
,
Favorites Connected Outputs
).
5
).
6
,
Favorites Connected Outputs
).
) on the
1
Global
, or
Available
, or
Available
35