Extron electronics XTP T USW 103 User Manual page 40

Audio tab
Click the tab (see figure 28,
Audio
output video mute options.
Figure 28. Audio Tab
Input panel
The analog input gain fader has a gain range of -18 to +24 dB. Adjustments are applied in
1 dB increments. The default setting is 0 dB.
Input Audio Format — From the
2
inputs 2 and 3. They can be
Analog Audio Gain — Click and drag the handle of the
3
field, or click the or
Up Down
Output panel
The switcher uses a black video signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal
so audio can be passed without video.
4 Allow Audio Only — Select the
to be output. When enabled, select the desired resolution and refresh rate from the
drop-down list to emulate in place of video.
Signal Type
XTP T USW 103 Switcher • XTP System Configuration Software
) to open the screen. It contains input gain and
1
Audio
drop-down list, select the format for
Audio Format
, , or .
Auto HDMI Analog
arrow to adjust the analog input gain.
check box to allow audio only
Allow Audio Only
slider, enter a value in the
Gain
32