Table of Contents
Advertisement
3
ADVANCED OPERATION
Emergency Calls
D
Emergency Calls
When [Emergency] is assigned to [R], you can manu-
ally make an Emergency call.
R] for 1 second.
Hold down [
q
• Enters the Emergency mode.
• When the transceiver enters the Emergency mode, it will
change to the Emergency channel and begin transmit-
ting, according to the presetting.
To exit from the Emergency mode, hold down [
w
again, or turn OFF the power.
• If the Emergency mode completes a preset number of
call cycles, the transceiver will automatically exit the
mode and return to the zone and channel that was in use
before you entered the Emergency mode.
NOTE:
The Emergency Mode Type can be set to "Silent" or
"Audible" by using the optional cloning software.
When "Audible" is set, the transceiver sounds a beep
when transmitting in the Emergency mode.
D
Lone Worker Emergency Call
When the Lone Worker function is activated, the Emer-
gency function is automatically turned ON, after the
preset time period has passed with no operation per-
formed.
Push [Lone Worker] to turn the function ON or OFF.
➥
R
[
]
R]
3-5
Advertisement
Table of Contents
