Icom IC-F5360D Operating Instructions Manual page 27

4
SCAN OPERATION
Temporary channel lockout
During a scan, you can temporarily delete a channel
from a scanning sequence.
This function speeds up scanning by skipping unwant-
ed channels.
Start the scan. (p. 4-2)
q
• When a signal is received, the scan pauses.
While the scan is paused, and if you want to skip the
w
frequency, push [Scan Delete/Add].
• "Ú" (scan target channel icon) disappears when the se-
lected channel is deleted from the scanning sequence.
• The channel is no longer scanned. However, depending
on the presetting, the deleted channel may be added to
the scan group again after the scan is cancelled.
See also: "Scan delete/add" on page 4-6
4-3