Emergency Calls - Icom iF34GT Instruction Manual

5
MDC 1200 SYSTEM OPERATION
D Emergency Calls
The MDC 1200 Emergency feature can be accessed using
the [Emergency Single] or [Emergency Repeat] key (p. 9).
The optional UT-124
feature. The transceiver will repeatedly send an Emergency
MDC 1200 command to the dispatcher for a programmed
length of time until it receives an acknowledgement signal.
The emergency call can be transmitted without a beep emis-
sion, and the LCD indication depends on how emergency is
programmed.
With MDC 1200 Emergency, the transceiver can also be
programmed to keep the microphone open during an emer-
gency call, allowing monitoring of the situation.
Ask your dealer for details.
30
can also activate this
man down unit
D Programming station ID code
If your transceiver is equipped with a 10-keypad, you can
enter a station ID code from the keypad for the SelCall, Call
Alert or Radio Check Call functions.
q Push [MDC Call] to enter the MDC menu selection mode.
w Select "SELCALL", "RADIOCHK" or "CALALERT" using
[CH Up], [CH Down], [MDC Up] or [MDC Down].
e Push [MDC Call] again to enter the transceiver alias se-
lection mode.
r Push any key of the keypad to enter the ID code program-
ming condition.
• The first digit blinks as below.
t Push [UP] to move the cursor to the right, push [DOWN]
to move the cursor to the left.
y When the last digit of the desired ID has been entered,
push [PTT] to transmit.
• Available characters
Key Characters Key
[0] (0)
(1)
[1]
[2] (2) (A) (B) (C)
[3] (3) (D) (E) (F)
[4] (4)
[5] (5)
Characters
[6] (6)
(7)
[7]
[8] (8)
[9] (9)
[M] (A)
[#] (3) (D) (E) (F)