Icom IC-F5360D Operating Instructions Manual page 28

4
SCAN OPERATION
Priority scan
The Priority scan scans all scan target channels or
GIDs in the zone while also monitoring the Priority 1
and Priority 2 channels.
When the scan is paused on the Priority 1 channel, the
other channels are not monitored.
D Setting a Priority channel
Depending on the presetting, you can manually set a
Priority channel (Priority 1, Priority 2 or Priority 1 & 2).
Select a channel that you want to set as a Priority
q
channel.
Channel 1
Push [Priority-channel Select].
w
• Enters the Priority Channel Setting mode.
PRI CH SEL
Push [UP] or [DOWN] to select "PRIORITY 1,"
e
"PRIORITY 2" or "PRIORITY 1 & 2."
PRI CH SEL
PRIORITY 1
Push [P1](OK).
r
• The selected channel is set as a Priority channel.
NOTE: When "PRIORITY 1 & 2" is selected, the
same channel is set as both Priority 1 and Priority 2
channels.
NORMAL
4-4