Icom IC-F5360D Operating Instructions Manual page 42

6
NXDN OPERATION <COMMON>
Memory Stack
The transceiver has a Memory Stack. When the trans-
ceiver receives a Status Message or a Short Message,
the received content is stored in the transceiver's Mem-
ory Stack.
If you turn OFF the transceiver's power, the contents
will be cleared.
The stored messages are displayed using the following
indication.
Information
Message type Caller ID Stack
Status Message
Short Message
Stored number Stored number
Display items Caller ID
Message contents
Received channel or GID
D Viewing a stored message
When a transceiver receives data:
q
• Displays "DATA RCVD," "COMPLETE," the received mes-
sage, the caller's unit ID and GID*.
*Displays only when the received call is a Group call.
• " " blinks.
Push [Stack].
w
• Enters the Memory Stack mode.
• Displays "STACK."
Push [UP] or [DOWN] to select a desired message.
e
Indication
Push [P2](DISP) to change the displayed item be-
r
"ID"
tween received ID, message contents and channel
number.
"ST"
"SM"
"01" to "15"
"ID"
"MSG"
"CH"
Push [P1](EXIT).
t
• Exits the Memory Stack mode.
6-3
STACK
SM01 ID
STACK
UID 0001
Received ID
STACK
SM01 MSG
STACK
SHORT MESSAG
Message contents
STACK
SM01 CH
STACK
CH
Channel number
Scrolls
CH01