Icom IC-F5360D Operating Instructions Manual page 57

7
NXDN OPERATION <TRUNKING MODE>
Forced Search
If you use the Forced Search function, the transceiver
searches for other Control channels using the following
hunt sequences.
Hunt sequence
Preferential Hunt Sequence
Normal Hunt Sequence
System Add Channel Sequence
Site Hunt Sequence
Comprehensive Hunt Sequence
Hold down [Forced Search Function] for 2 seconds
q
to turn ON the Forced Search Function.
• Displays the current site number.
The transceiver starts to search for a Control chan-
w
nel signal.
• Displays "SEARCHING."
When the transceiver finds and registers to a control
e
channel, the normal screen is displayed on the func-
tion display.
Explanation
The transceiver searches for a Control channel that is set as the
Preferential Hunt Control channel.
The transceiver selects this Control channel with a high priority.
The transceiver searches for a Control channel that is set as the
Normal Hunt Control channel.
The transceiver searches for up to 8 Control channels that are
added by the system.
The transceiver searches for a Control channel that is set as the
Site Hunt Control channel in each site.
The transceiver searches for a Control channel that is set in the
network frequency table.
7-14