Icom IC-F5360D Operating Instructions Manual page 64

8
NXDN OPERATION <CONVENTIONAL MODE>
Receiving a call (Continued)
D Individual Call Acknowledge Request call
When you receive an Individual Call with an acknowl-
edgement request which includes your own Individual
ID, your transceiver automatically transmits a acknowl-
edgement signal, and informs you the calling by beep
sounds and bell mark blinks on the function display. In
addition, you can easily call back to the calling trans-
ceiver.
When you receive an Individual call with an acknowl-
q
edgement request signal that includes your unit ID:
• Beeps sound.
• Alternately displays the caller's unit ID and "INCOMING."
• " " blinks for about 30 seconds.
To call back to the caller station, push [PTT] while
w
" " is blinking.
D Status call
When you receive a Status call, your transceiver dis-
plays a received status message on the function display.
The received message is stored in the Memory Stack,
and you can view the message contents in the memory.
(p. 6-3)
When you receive a Status call:
➥
• Beeps sound.
• Displays "DATA RCVD," "COMPLETE," the received mes-
sage, the caller's unit ID and GID*.
*Displayed only when the received call is the Group call.
• " " blinks on the function display.
The message is stored in the Memory Stack.
COMPLETE
STATUS 001
UID 0001
GID 0002
8-7