Other Icons On The Standard Screen - Tractel Dynafor LLX2 1 t Operation And Maintenance Manual

6.3.2. Other icons on the standard screen

6.3.2.1 Sensor icon:
Sensor settings and data
Display
27
6.3.2.2. Display Unit icon:
Display Unit Settings and Data
28
6.3.2.3 Identification icon: ID
29
Display unit and sensor identification and data
Action
Confirm selection
ESC
Return to standard display
Select an icon and enable the
available options
Select an icon and enable the
available options
No action
ESC
Return to standard display
No action
No action
Return to standard display
ESC
Return to standard display
No action
No action
23
Comments
Sensor parameters display
AD 22 = sensor address
Switch from standard to power saving
mode after 28' if variation step > 15% of
the stress. Enabled
Switch to power saving mode in standby
Disabled X
TOTAL SHUTDOWN: Powers down the
sensor. To power up again you must use
the ON/OFF switch on the sensor
Display unit parameter display.
AD = display unit address
This screen is displayed if the
sensor/display unit pair is locked.
Display identification of elements in
the network.
Sensor: Serial No., capacity, hardware
version, software version,
date of last calibration or
adjustment
Disp. Unit: Serial No.,
version, software version.
GB
hardware