Turning On The Display Unit - Tractel Dynafor LLX2 1 t Operation And Maintenance Manual

6.1.5 Turning on the display unit

Sensor
Identification
Metrological
check
Link locked
The welcome screen is shown for 4 seconds, then the standard display window is shown.
6.2 Elementary functions
This chapter presents the functions that enable elementary use of dynafor
6.2.1 Standard display screen
X
In this manual, this number refers , should this happen, to the position of the screen in the synopsis at
the end of this manual.
A
ON / OFF Current time
No action
ESC
No action
Select an icon
Select an icon
Current date
Action
Standard Display:
After the welcome screen, the
standard display screen appears
automatically.
The sensor / display unit assembly
is ready to use.
13
Date of last
metrological
check
Radio
channel used
LLX2.
™
Comments
GB