Fieldfox Microwave Spectrum Analyzers - Keysight Technologies FieldFox N9913A Configuration Manual

12 | Keysight | FieldFox Handheld Analyzers - Configuration Guide

FieldFox Microwave Spectrum Analyzers

FieldFox microwave spectrum analyzer models
Step 1. Select the model that provides the desired frequency range.
Model Description
N9935A 9 GHz FieldFox microwave spectrum analyzer
N9936A 14 GHz FieldFox microwave spectrum analyzer
N9937A 18 GHz FieldFox microwave spectrum analyzer
N9938A 26.5 GHz FieldFox microwave spectrum analyzer
N9960A 32 GHz FieldFox microwave spectrum analyzer
N9961A 44 GHz FieldFox microwave spectrum analyzer
N9962A 50 GHz FieldFox microwave spectrum analyzer
Step 2. Select optional measurement capabilities.
Any of these options can easily be added as a software upgrade in the future.
FieldFox microwave spectrum analyzer options
Option Description
Spectrum analyzer
100 2 3.5 mm (m) connectors
209 Extended range transmission analysis (ERTA)
220 Full-band tracking generator
235 Pre-amplifier
236 Interference analyzer and spectrogram
238 Spectrum analyzer time gating
312 Channel scanner
320 Reflection measurements
350 Real-time spectrum analyzer (RTSA)
351 I/Q Analyzer (IQA)
3
355 Analog demodulation
Power measurements
208 USB power sensor meas. vs. frequency
302 USB power sensor support
310 Built-in power meter
330 Pulse meas. with USB peak power sensor
System features
030 Remote control capability
307 GPS receiver
309 DC bias variable-voltage source
Windows based software
89601B 89600 VSA Software
1. The spectrum analyzer can be tuned to 5 kHz.
2. Order Option 100 for 3.5 mm (m) test port connectors. With N9938A-100, the spectrum analyzer is built with 3.5 mm test port connectors instead of the
standard Type-N (f). Option 100 is a prerequisite for Option 320 for N9938A.
3. Requires CPU2 fast processor. See page 6, FAQ #13
4. List of compatible power sensors available from www.keysight.com/find/fieldfoxsupport
Prerequisite options/notes
Only available on N9938A. Option 100 is only available at time of purchase. It is not
available as an upgrade.
Requires 220. Recommend 307. Requires two FieldFoxes. See page 6, FAQ # 10.
CW, CW coupled, and tracking
-
-
-
-
320 requires 220 on all models. On N9938A specifically, 320 also requires 100.
Recommend 235. See page 6, FAQ # 12
3
-
-
Requires 302
Need to order USB power sensor
No power sensor required. See page 8, FAQ #1
Need to order USB peak power sensor. See page 9, FAQs #7 and #8
Requires an iOS device
Need to order GPS antenna, N9910X-825. See page 9, FAQ #3
-
3 -
Frequency range Test port connectors
1
100 kHz to 9 GHz Type-N (f)
100 kHz to 14 GHz Type-N (f)
100 kHz to 18 GHz Type-N (f)
100 kHz to 26.5 GHz Type-N (f)
9 kHz to 32 GHz NMD 2.4 mm (m)
9 kHz to 44 GHz NMD 2.4 mm (m)
9 kHz to 50 GHz NMD 2.4 mm (m)
4
2