The Fieldfox Handheld Analyzer Family - Keysight Technologies FieldFox N9913A Configuration Manual

03 | Keysight | FieldFox Handheld Analyzers - Configuration Guide

The FieldFox Handheld Analyzer Family

This configuration guide describes configurations, options and accessories for the FieldFox family of portable analyzers. This guide
should be used in conjunction with the technical overview and data sheet for a complete description of the analyzers. The table below
shows a comparison of the functions available in the FieldFox family of analyzers.
The following accessories are included with every FieldFox: AC/DC adapter, battery, soft carrying case, LAN cable and Quick Reference
Guide.
Note: Combination analyzer (combo) = Cable and antenna tester (CAT) + Vector network analyzer (VNA) + Spectrum analyzer (SA)
FieldFox family and options
Option Description
CAT/vector network analysis
010 VNA time domain
112 QuickCal
210 VNA transmission/reflection
211 VNA full 2-port S-parameters
212 1-port mixed-mode S-parameters
215 TDR cable measurements
305 Cable and antenna analyzer
308 Vector voltmeter
320 Reflection meas. (RL, VSWR and scalar meas.)
Spectrum analysis
209 Extended range transmission analysis (ERTA)
220 Tracking generator
233 Spectrum analyzer
235 Pre-amplifier
236 Interference analyzer and spectrogram
238 Spectrum analyzer time gating
312 Channel scanner
350 Real-time spectrum analyzer (RTSA)
351 I/Q Analyzer (IQA)
355 Analog demodulation
Power measurements
208 USB power sensor meas. versus frequency
302 USB power sensor support
310 Built-in power meter
330 Pulse meas. with USB peak power sensor
System features
030 Remote control capability
307 GPS receiver
309 DC bias variable-voltage source
Windows based software
89601B 89600 VSA Software
Notes:
Base model means that the functionality listed is the primary function of that instrument. For example, on the N991xA or N995xA combo analyzers,
cable and antenna analysis is the standard function included with every N991xA or N995xA.
1. Option 305 is not available on the N993xA or N996xA. However, a subset of cable and antenna analyzer measurements, return loss and VSWR, is available
as Option 320.
2. Option 320 is not applicable to N991xA, N995xA, or N992xA. The reflection measurements of return loss and VSWR are included with every N991xA,
N995xA, and N992xA. So there is no need for an Option 320 on these analyzers.
3. On the N991xA or N995xA analyzers, order Options 233 and 210 to obtain a tracking generator with the spectrum analyzer. There is no Option 220 on the
N991xA or N995xA analyzers. To obtain tracking generator capability, you need Options 233 and 210. Option 233 provides the spectrum analyzer capability
and Option 210 the "tracking" capability.
RF and microwave Microwave vector
(combination) analyzer network analyzer (VNA)
N991xA N992xA
N995xA
√ √
√ on N991xA
√
- on N995xA
√ Base model
√ √
√ √
√ √
Base model √
√ √
Note 2 Note 2
√ —
Note 3 —
√ —
√ —
√ —
√ —
√ —
√ - on N9912A —
√ - on N9912A —
√ —
√ √
√ √
√ √
√ √
√ √
√ √
√ √
√ - on N9912A —
Microwave spectrum
analyzer (SA)
N993xA
N996xA
—
—
—
—
—
—
Note 1
—
√
√
√
Base model
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√