Keysight Technologies FieldFox N9913A Configuration Manual page 17

17 | Keysight | FieldFox Handheld Analyzers - Configuration Guide
Calibration Kits (continued)
FieldFox analyzers support most standard HP/Agilent/Keysight mechanical calibration kits and all Keysight USB ECal modules.
Custom calibration kits can be created and uploaded to FieldFox using Data Link software.
Model Description
2.4 mm
85563A 3-in-1 OSL cal kit
85564A 3-in-1 OSL cal kit
85056D Economy cal kit
85056A Standard cal kit
N4693A ECal
Waveguide
N9911X-11x Econ. waveguide cal kit
N9911X-21x Econ. waveguide cal kit
N9911X-31x Econ. waveguide cal kit
N9911X-41x Econ. waveguide cal kit
X11644A Waveguide cal kit
P11644A Waveguide cal kit
K11644A Waveguide cal kit
R11644A Waveguide cal kit
Q11644A Waveguide cal kit
U11644A Waveguide cal kit
Connector Frequency range
2.4 mm (f) DC to 50 GHz
2.4 mm (m) DC to 50 GHz
2.4 mm DC to 50 GHz
2.4 mm DC to 50 GHz
2.4 mm 10 MHz to 50 GHz
WR-137 5.38 to 8.18 GHz
WR-90 8.2 to 12.5 GHz
WR-62 11.9 to 18 GHz
WR-42 17.6 to 26.7 GHz
WR-90 8.2 to 12.4 GHz
WR-62 12.4 to 18 GHz
WR-42 18 to 26.5 GHz
WR-28 26.5 to 40 GHz
WR-22 33 to 50 GHz
WR-19 40 to 60 GHz
Components
open, short, fixed load (all female)
open, short, fixed load (all male)
open, short, fixed load (both female and male)
open, short, load, fixed load, sliding load (both female and male)
connectors configurable
short, termination, offset length
short, termination, offset length
short, termination, offset length
short, termination, offset length
short, shim, termination, standard section
short, shim, termination, standard section
short, shim, termination, standard section
short, shim, termination two straight sections
short, shim, termination, two straight sections
short, shim, termination, two straight sections