LifeSpan C5i Owner's Manual page 21

Assembling Your C5i Upright Bike
Step 5: Front Support Assembly
A. Adjust the Seat Post so it is at the highest setting.
B. Tilt the bike back until it is resting on the Seat and the Rear Support
Assembly (as shown below.)
C. Align the Front Support Assembly (2) with the Front Main Frame
Bracket (B).
D. Install two M8 Bolts (15) and Washers (16) through the middle holes
of the Front Main Frame Bracket (B) and into the Front Support
Assembly (2). Do not tighten bolts yet.
E. Install two M8 Bolts (15) and Washers (16) through the top holes of
the Front Main Frame Bracket (B) and into the Front Support
Assembly (2). Do not tighten bolts yet.
F. Install two M8 bolts (15) and Washers (16) through the bottom holes
of the Front Main Frame Bracket (B) and into the Front Support
Assembly (2). Do not tighten bolts yet.
G. Securely tighten the two M8 Middle Bolts (15) first, then securely
tighten the two M8 Top Bolts and two M8 Bottom Bolts.
2
16
15
B
16
24
15
16
15