LifeSpan C5i Owner's Manual page 20

Step 3: Seat Assembly
A. Insert the Seat Post (4) into
seat post cover. The holes in
the Seat Post should be point-
ing toward the rear of the bike.
B. Pull on the Seat Post Adjust-
ment Knob (M) to release the
locking pin and slide the Seat
Post (4) down into the Seat
Post Tube (L).
C. When the desired height is
reached, release the Seat Post
Adjustment Knob (M) to allow
the locking pin to engage.
NOTE: In order to complete Step
5 and 6, the seat post needs to
be set to the highest level. Pull
the seat post up until the lock pin
clicks in the last hole in the seat
post.
Step 4: Seat Assembly
A. Place the Seat (5) over the Seat
Mount Post (N).
B. Align the Seat (5) so the front
of the seat is centered with the
Main Frame (1) and parallel to
the floor.
C. Securely tighten the pre-in-
stalled Nut (23) on each side of
the Seat Mounting Bracket (O)
under the Seat (5).
Assembling Your C5i Upright Bike
4
5
O
1
M
L
23
N
23