Reboot; Run Config - DPS Telecom NetGuardian-16S User Manual

19

8.2.2 Reboot

Fig. 8.2.2.1. Reboot command
Reboot
The Reboot command reboots the NetGuardian-16S.
To scroll to the next menu command, press the – button.
To reboot the NetGuardian-16S, press Sel. The LCD will briefly display the message Rebooting ..., and
the normal boot sequence will begin.
To exit the Command Menu without rebooting, press Menu.

8.2.3 Run Config

Fig. 8.2.3.1. Run Config command
Run Config
The Run Config command forces the TTY configuration interface to run over the upper craft port at 9600 baud.
To scroll to the next menu command, press the – button.
To run the TTY configuration utility, press Sel.
To exit the Command Menu without running the TTY interface, press Menu.