Do you have a question about the M7310 and is the answer not in the manual?
Questions and answers
Anne Garreaux
February 7, 2025
How do you set up voice mail
1 comments:
Mr. Anderson
May 14, 2025
To set up voicemail on a Nortel M7310 phone:
1. Press the CHECK VOICEMAIL key or press FEATURE 981. 2. Enter your voicemail password. If the default password (usually "0000") does not work, it may have been changed and you would need to reset it. 3. To record your personal greeting: - After logging in, press the ADMIN softkey. - Press the GREET softkey. - Press the REC softkey. - Press the PRIME softkey. - Press the YES softkey. - After the tone, record your new personal greeting. - Press the OK softkey to stop and accept your recording.
4. To record an alternate greeting (for vacation or absence): - Follow the same steps as above until the REC softkey. - Press the ALT softkey instead of PRIME. - Press the YES softkey. - Record your alternate greeting after the tone. - Press the OK softkey to stop and accept the recording.
Selecting a ring 1. Press type and volume 2. Press level 3. While the telephone is ringing, press volume level. 4. Press Page 1 Enterprise Edge M7310 User Card ƒ•‚ ƒ when finished. ƒ•‡ DOWN for the level you want. when finished.
Page 5
These telephones now conform to the latest standards in relation to the positioning of Q and Z on the number keys. The Q appears on key number 7 and the Z appears on key number 9. Page 3 Enterprise Edge M7310 User Card ƒ•‚ Internal Autodial 1.
Attach the stand using either pair of slots; to raise the back of the telephone to its highest position, use these slots. Once the above work is complete, plug the line cord back into its wall socket. Page 4 Enterprise Edge M7310 User Card...
Need help?
Do you have a question about the M7310 and is the answer not in the manual?
Questions and answers
How do you set up voice mail
To set up voicemail on a Nortel M7310 phone:
1. Press the CHECK VOICEMAIL key or press FEATURE 981.
2. Enter your voicemail password. If the default password (usually "0000") does not work, it may have been changed and you would need to reset it.
3. To record your personal greeting:
- After logging in, press the ADMIN softkey.
- Press the GREET softkey.
- Press the REC softkey.
- Press the PRIME softkey.
- Press the YES softkey.
- After the tone, record your new personal greeting.
- Press the OK softkey to stop and accept your recording.
4. To record an alternate greeting (for vacation or absence):
- Follow the same steps as above until the REC softkey.
- Press the ALT softkey instead of PRIME.
- Press the YES softkey.
- Record your alternate greeting after the tone.
- Press the OK softkey to stop and accept the recording.
This answer is automatically generated