Download Print this page

LG FH4F9BDS0H Owner's Manual page 41

Hide thumbs

Advertisement

Symptoms
Washing machine does
not start
Washing machine will
not spin
Door does not open
Wash cycle time
delayed
Fabric softener
overflow
Softeners dispensed
too early
40
Reason
Electrical power cord may not be
plugged in or connection may be
loose.
House fuse blown, circuit breaker
tripped,or a power outage has
occurred.
Water supply tap is not turned on.
Check that the door is firmly shut.
Too much softener may cause an
overflow.
Too much softener may cause an
premature dispensing.
Solution
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualified electrician.
• Turn on water supply tap.
• Close the door and press the Start/Pause
button. After pressing the Start/Pause
button, it may take a few moments before
the washing machine begins to spin. The
door must be locked before spin can be
achieved. Add 1 or 2 similar items to help
balance the load. Rearrange load to allow
proper spinning.
• Once washing machine has started,
the door cannot be opened for safety
reasons. Check if the 'Door Lock' icon is
illuminated. You can safely open the door
after the 'Door Lock' icon turns off.
• The washing time may vary by the
amount of laundry, water pressure, water
temperature and other usage conditions.
If an imbalance is detected or if the suds
removing programme is on, the wash time
will increase.
• Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum fill line.
• Follow the guidelines provided by the
detergent manufacturer.
• Close the dispenser drawer slowly. Do not
open the drawer during the wash cycle.

Advertisement

loading