Adding Cleaning Products
• Detergent should be used according to the instruction
of the detergent manufacturer and selected according
to type, colour, soiling of the fabric and washing
• If too much detergent is used, too many suds can
occur and this will result in poor washing results or
cause heavy load to the motor.
• If you wish to use liquid detergent follow the guidelines
provided by the detergent manufacturer.
• You can pour liquid detergent directly into the
main detergent drawer if you are starting the cycle
• Do not use liquid detergent if you are using Time
delay, or if you have selected Pre Wash, as the liquid
• If too many suds occur, reduce the detergent amount.
• Detergent usage may need to be adjusted for water
temperature, water hardness, size and soil level of the
load. For best results, avoid oversudsing.
• Refer to the label of the clothes, before chooseing the
detergent and water temperature.
• When using the washing machine, use designated
detergent for each type of clothing only:
– General powdered detergents for all types of fabric
– Powdered detergents for delicate fabric
– Liquid detergents for all types of fabric or
designated detergents only for wool
• For better washing performance and whitening, use
detergent with the general powdered bleach.
• Detergent is flushed from the dispenser at the
beginning of the cycle.
• Do not let the detergent harden. Doing so may lead to
blockages, poor rinse performance or odour.
• Full load : According to manufacturer's
• Part load : 3/4 of the normal amount
• Minimum load : 1/2 of full load
Adding Detergent and Fabric Softener
• Main wash only →
• Pre wash+Main wash →
• Too much detergent, bleach or softener may cause an
• Be sure to use the appropriate amount of detergent.
Adding Fabric Softener
• Do not exceed the maximum fill line. Overfilling can
cause early dispensing of the fabric softener, which
may stain clothes. Close the dispenser drawer slowly.