1 Safety Instructions and General Warnings
Precautions for CE Low Voltage Directive Compliance
This drive has been tested according to IEC/EN 61800-5-1: 2007, and it fully complies with the Low Voltage Directive.
The following conditions must be met to maintain compliance when combining this drive with other devices:
• Do not use drives in areas with pollution higher than severity 2 and overvoltage category 3 in accordance with IEC/EN
664.
• Ground the neutral point of the main power supply for 400 V Class drives.
In the drives L20145 through 20415 and L40112 through 40216, the wire bending space (space between
terminals and cable entry point) provided is smaller than recommended in the IEC/EN61800-5-1.
We declared the CE marking based on the harmonized standards. Refer to the Technical Manual or contact YASKAWA
for more detailed information.
EN 8
YASKAWA ELECTRIC TOEP C710616 33G AC Drive L1000A - Quick Start Guide