Basic Jack Operation In Manual Mode; Onecontrol Touch Panel App In Standard And Manual Modes - Lippert Components ground control TT Owner's Manual

Basic Jack Operation In Manual Mode

To reach Manual Mode (Fig. 13) for leveling:
1.
While in Standard Mode (Fig. 9), use the arrows (Fig. 9G) to scroll to Manual Mode (Fig. 9E). Hit "ENTER"
(Fig. 9B).
2. Front and rear jacks can be operated in Manual Mode. The Power Tongue Jack cannot be operated in
Manual Mode.

OneControl Touch Panel App In Standard and Manual Modes

Standard Mode Features
• Press "EXTEND" (Fig. 9I) or "RETRACT" (Fig. 9H) and "FRONT" (Fig. 9A) to extend or retract the Power Tongue
Jack.
• Press the "AUTO LEVEL" (Fig. 9J) button to start the auto leveling sequence.
• Press the "AUTO HITCH" (Fig. 9K) button to start the hitch recognition sequence when reconnecting to the
tow vehicle.
• Use the "UP" or "DOWN" arrow (Fig. 9G) buttons to cycle through the menu screen options:
A. Info: Scroll to "INFO" (Fig. 9C) and press "ENTER" (Fig. 9B) button to display system
information, e.g., angle, jack stroke or software version.
B. Auto Retract: Scroll to "AUTO RETRACT" (Fig. 9D) and press "ENTER" button to start the
"Auto Retract" sequence, which will retract all jacks. The Power Tongue jack does not retract.
C. Manual Mode: Scroll to "Manual Mode" (Fig. 9E) and press "ENTER" button to start Manual
Level operation.
Manual Mode Features
NOTE: Upon entering Manual Mode, a tutorial on operating the jacks will appear on the screen. Press
"OK" to clear the tutorial. To delete the tutorial, click the "Don't show this again" box in the
bottom right of the screen.
• Press "EXTEND" (Fig. 13F) or "RETRACT" (Fig. 13E) and "FRONT" (Fig. 13B) to operate front jacks.
• Press "EXTEND" or "RETRACT" and "REAR" (Fig. 13D) to operate rear jacks.
• Press "EXTEND" or "RETRACT" and "RIGHT" (Fig. 13C) to operate right jacks.
• Press "EXTEND" or "RETRACT" and "LEFT" (Fig. 13A) to operate left jacks.
NOTE: To operate jacks individually, press "EXTEND" or "RETRACT" then press the "LEFT" (Fig. 13A) or
"RIGHT" (Fig. 13C) button while simultaneously pressing the "FRONT" (Fig. 13B) or "REAR" button
(Fig. 13D), depending on which jack needs to be operated.
NOTE: If the jacks will not operate individually using the method described above, but they operate
properly when Auto Level is performed, the Twist Prevention Protection system has locked out the
operation to prevent damage to the frame of the trailer.
Rev: 11.13.2017
Fig. 13 Manual Mode
B
A C
D
E F
Page 13
Ground Control TT Leveling OCTP Owner's