Touch Panel Diagram - Auto Leveling Control Touch Panel; Operation - Auto Leveling Control Touch Panel; Basic Power Tongue Jack Operation; Unhitching From A Tow Vehicle - Lippert Components ground control TT Owner's Manual

Touch Panel Diagram - Auto Leveling Control Touch Panel

B
C
Callout Description
A Red/Green LED - Indicates the status of the system.
B Up Arrow - Extends Power Tongue Jack .
C Down Arrow - Retracts Power Tongue Jack.
D Auto Level Button - Places leveling system into auto level mode.
E Hitch Height Button - Initiates the Hitch Recognition feature.
Retract All Button - Places leveling system into full retract mode. Power Tongue Jack does
F
not retract.

Operation - Auto Leveling Control Touch Panel

Be sure to park the trailer on solid and level ground. Prior to operation, clear all jack landing locations
of debris and obstructions. The locations should also be free of surface depressions and moisture. When
parking the trailer on extremely soft surfaces, utilize load distribution pads under each jack.

Basic Power Tongue Jack Operation

• To turn on the touch panel, press both "UP" and "DOWN" arrows (Fig. 3B and Fig. 3C) at the same time.
The green indicator LED (Fig. 3A) will turn on.
• Press the "UP" arrow (Fig. 3B) to extend the Power Tongue Jack.
• Press the "DOWN" arrow (Fig. 3C) to retract the Power Tongue Jack.

Unhitching From A Tow Vehicle

NOTE: Prior to unhitching from the tow vehicle, ensure trailer is parked on a level surface and chock the tires of the
trailer.
NOTE: Ensure the foot pad of the Power Tongue Jack is pinned securely in place with the clevis pin and hairpin
cotter pin.
1. Disconnect any wires, chains, or sway control that may be equipped between the tow vehicle and the trailer.
Unlatch the trailer coupler.
Rev: 11.13.2017
Fig. 3
A
D
To turn on the touch panel, press the Up
and Down arrow buttons at the same
time.
Page 5
E
F
Ground Control TT Leveling OCTP Owner's