Manual Operation; Manually Raise The Bed(S)/Sofa Or Dinettes - Lippert Components HAPPIJAC Oem Installation Manual

Manual Operation

When bed(s)s/are not being manually raised or lowered, the brake MUST be set or the bed(s) will
drift down, causing possible personal injury, product or property damage.
Before releasing the brake in manual mode, make sure there are no obstacles below the bed(s), sofa or
dinette. Be prepared to apply the brake, if necessary, and make sure to move the brake back into the ON
position once the desired height is reached.

Manually Raise the Bed(s)/Sofa or Dinettes

Do the following in the order listed:
1.
Unplug the motor harness (Fig. 36A) from the relay control module.
2. Release the brake by pushing the lever to the OFF position as indicated on the label below the brake
lever. (Fig. 37A).
Rev: 10.22.19
Moving parts can cut or crush. Keep clear of moving parts.
A
Fig. 36
Fig. 37
Cross-connecting
Page 20
Shaft
A
CCD-0001541