Load Menu; Shortening Management; Language Selection - Broaster 1800 Service Manual

LOAD MENU:

Menu changes that have been downloaded
to a Flash Drive can be loaded onto another
fryer with the SmartTouch control.
Plug the flash drive into the USB port in the
front panel above the control panel. Press
the Load Menu button on the Preset menu
display and the display below will appear.
X
Insert Flash Drive with menus available and
reopen Load Menu to see Available menus.
Press the OK button to download and see
the available menus.
When the display appears there may be
more than one menu. Press the bar for the
menu you want loaded and a "Loading
Menu..." box will appear with a progress
bar.
When the menu is loaded a box will appear
saying "Menu Loaded". Press the OK but-
ton and the Preset display will appear.
Remove the flash drive fro the USB port.
OK
broaster.com Manual #17270 10/13 Rev 12/14

SHORTENING MANAGEMENT:

Pressing this option opens the Shortening
Management Display.
X
Shortening Settings
Shortening Type Selected
Heating Type Selected
Shortening Changed Today
Shortening Last Changed:
Unknown
Pressing the button next to Shorting Type
toggles between "Liquid" and "Solid".
The Heating Type Selected button is only
available to the Service Tech. Pressing this
button toggles the type between Electric
and Gas.
Pressing the "Shortening Changed Today"
bar enters today's date and time as a
reminder when the oil was last changed.
this also resets the "Cycles Since Last Fil-
tered" counter to 00 on the Cook Tab.

LANGUAGE SELECTION:

Pressing this option will allow you to
change the language used in all displays.
(This option is not yet active)
3-9
Liquid
Electric
OK