Table of Contents
Advertisement
4.16 Setup Backup/Log Interval Mode (Pre-defined Backup Times)
Users can use this command to define the log interval of MU-201.
So the device will log the GPS reports inside the flash memory until it reaches the pre-defined backup times, and then
send the reports altogether.
Setup format：#「username」,「Password」,「Function mode」, 「backup mode」*
Example:
Command: #username,0000,21,0~2*
The table 4.16.1 describes the meaning of each segment in the message above
Text Keyed In SMS
#
username
0000
21
0~2
*
Situation
Setup Succeeds
MU-201 is in Emergency Mode
Description
Start sign.
Default ID of MU-201.
If you have changed the Username, please use the updated one.
Default password.
If you have changed the password, please use the updated one.
Function code
0: Disable Backup or Log function completely.
1: Enable Backup function, the device will log the data when there is no GSM/GPRS
reception.
2: Enable Log Interval function, the device will log the data based on defined report interval.
And then send it altogether.
End sign.
Table 4.16.1 The explanation of each segment of command
The table 4.16.2 shows each confirmation message reply after setup
Message Reply
Device log mode is disable.,3.816V
in emergency, log mode setup is not allowed.,3.830V
27
Advertisement
Table of Contents
